The quickest way to clean the joints is to use high pressure and high-temperature steam. As well as for products, steam should not be used lightly. Then, do a test in a little visible corner. Many steam cleaners are equipped with perfect brush kits for cleaning tile joints, even in the case of ceramic tiles. In this article, we will discuss how effective steam cleaning is on tile floors.
Table of Contents
How effective is steam cleaning on tile floors?
Tile and joint cleaning are some of the most popular uses for steam cleaners. With the nozzle of the cleaner, direct the jet of steam to the dirtiest places to remove it and disinfect at the same time. On very old or silicone gaskets, apply the steam briefly until you check that they do not jump or become damaged. When you’re done, wipe with a soft cloth to dry and finish removing any debris.
Disinfect surfaces with steam
You don’t need to run the steamer every day unless you’re a disinfection maniac. When you do the weekly cleaning, it will help keep surfaces clean. As it is not necessary to use chemical products to clean with a steam cleaner. No toxic cleaner will come into contact with the food preparation area.
Sanitize the toilet tile
In the bathroom, don’t just clean the tiles with the steamer. The toilet, bidet, shower are also suitable surfaces for steam cleaning. The corners of the shower where mold can appear or the places where the lime accumulates are cleaned much more comfortable with the steam jet. It will look like new at the same time that you destroy the bacteria.
Good for kitchen floor
In the kitchen, they end up accumulating traces of grease, odors and vapors. It ends up removing the shine of the tiles and the tiles. In the bathroom, the remains of lime and steam from the water end up reducing the shine and cleanliness.
How to clean tile joints effectively
To effectively clean all types of tiles and prevent them from deteriorating over time or the use of abrasive products. The best system is to degrease them with a soft cloth soaked in white vinegar. If more disinfection is desired, it can be mixed with liquid soap and a few drops of lemon.
If the tile joints are blackened but have not lost the grout, simply wipe with a cloth with water and bleach, ammonia or hydrochloric acid.
You can also use detergents specially designed for the most resistant dirt. They sold in specialized stores and department stores. In this case, the best way to apply it is to use gloves. They are usually somewhat aggressive soaps and a fine brush with stiff bristles. Once clean, it must be rinsed with plenty of water so that no residue remains.
After removing the dirt, you can also apply some commercial product that is recommended to whiten the joint.
Cleaning with steam is another of the systems that can be used for both tiles and joints. If you notice the gap in the joint because the grout has been lost, there are two options. Use a joint repairer or, directly, perform the procedure that follows to prime the joints.